Difficulty: novice
Content
| Table of Contents | ||||
|---|---|---|---|---|
|
Learning Objectives
After reading this article, you’ll be able to:
Install VergeSense sensor
After successful VergeSense gateway installation, you can now start sensor installation.
Place and set up up to 50 VergeSense sensor devices clustered around the gateway. The sensors will automatically set up a mesh network to connect to the gateway and each other.
| Note |
|---|
The maximum distance between the gateway and the nearest installed sensor should be no more than 10 meters. |
Unboxing - content
VergeSense sensor, with 2 magnets on the bottom
Bottom plate which can be used to install without the magnets
Bag with installation equipment depending on the ceiling type
 |  |
Search
| Live Search |
|---|