| Table of Contents |
|---|
Preparation
Check here the checklist for installation: Checklist for hardware installation
Make sure you have enough space (3.5mm) between the door and the door frame to install the sensor.
...
- Tape the sensative strip to either the door or the door frame. In this example: the door itself
- The rectangle magnet needs to be placed on the door frame and is to be on the same level as the sensative logo (see image)
- Your devices key information, such as Sensor ID (= serial-number with all capitals and -) and serial number can be found in the package on a barcode. Make sure you communicate these to your Spacewell Implementation Consultant.
- Send Sensor Plan with sensor placement indication to Spacewell (scan, picture) for mapping
(Allow time for upload sensor ID and mapping (Spacewell), following Sensative Strip Configuration Guide)
...
You can check these videos for examples on how to mount the devices:
...
