Difficulty: starter

What is Pointgrab?

The PointGrab™ sensors detect people’s presence, locations and numbers, and send analytics data over a secure, encrypted network connection.

Desk, Meeting Room and Reception areas are intended for real-time people counting. They produce information such as “Desk A is now occupied” or “Meeting Room B now contains 7 people”.

On the other hand, Traffic Line areas are intended to track traffic going in and coming out of a specific location. They produce information such as “In the last update period, 5 people crossed the Traffic Line area”.

How does it work?

Non-intrusive solution – images are never transmitted or stored on the sensor

All of the image processing is done on the sensor itself, the sensor does not store or output images, and has no interface to extract images, so privacy is fully protected. The sensor will only transmit the analytics data to the cloud management system.

As the sensor tracks peoples’ movement rather than personal devices (e.g. mobile phones), it is completely anonymous.

In the screenshot, you can see how the coordinates of the people arrive at Pointgrab? These are transmitted to the Workplace IoT platform as "2 people within detection range of sensor”.

How often is data captured?

The Technically, the sensor will can check every 15 sec – 1 minute for coordinates15 minutes for coordinates. It will count the people in the area for at least half of the time of update time.

As a default, the data is uploaded into the Workplace Cloud every 1 min: this interval is so low enough, that a person in the room will be captured, yet it also reduces false detection issues.

Pointgrab Accuracy

Pointgrab provides highly accurate data on Presence detection, yet some factors might impact people detection:

• Make sure lights are turned on/there is enough daylight. It should not be too dark in the room

• Nothing should be blocking the sensor detection area

  • items might be suspended from the ceiling (eg HVAC or light fixtures)

  • items might be too high and block visibility (eg high back chairs or office screens)

• Reflections in windows (might be avoided by restricting count area in the configuration)

• Installation needs to be level (not tilted)

• Installation location: make sure to verify measurements (height + length/width) in the config platform

Find more information on
https://www.pointgrab.com/our-product/
https://www.pointgrab.com/wp-content/uploads/2018/04/CogniPoint-Data-Sheet.pdf

Search