Difficulty: starter
Content
| Table of Contents | ||||
|---|---|---|---|---|
|
Learning Objectives
After reading this article, you’ll be able to:
Understand PointGrabXOVIS's people detectioncounting
Define if PointGrab’s XOVIS’s data types suit your use case
What is
PointgrabXovis?
The PointGrab™ sensors detect people’s presence, locations and numbersXOVIS sensors detect people flow across a(n imaginary) traffic line, and send analytics data over a secure, encrypted network connection.
Desk, Meeting Room and Reception areas are intended for real-time people counting. They produce information such as “Desk A is now occupied” or “Meeting Room B now contains 7 people”.
On the other hand, Traffic Line areas are intended to track traffic going in and coming out of a specific location. They produce information such as “In the last update period, 5 people crossed the Traffic Line area”going IN to the area, 3 people crossed the line going OUT”. The delta, or difference, between these two values provides us with the information on how many people are still in the tracked area (utilization).
How does it work?
Non-intrusive solution – images are never transmitted or stored on the sensor
All of the image processing is done on the sensor itself, the sensor does not store or output images, and has no interface to extract images, so privacy is fully protected. The sensor will only transmit the analytics data to the cloud management system.
As the sensor tracks peoples’ movement rather than personal devices (e.g. mobile phones), it is completely anonymous.
In the screenshot, you can see how the coordinates of the people arrive at Pointgrab? These are transmitted to the Workplace IoT platform as "2 people within detection range of sensor”..
Data is only transmitted in text format and without any kind of personally identifiable information.
How often is data captured?
Technically, the sensor can check every 15 sec – 15 minutes for coordinates. It will count the people in the area for at least half of the time of update timeis always on and will update the Workplace platform as soon as a detection as occurred.
As a default, the data is uploaded into the Workplace Cloud every 1 min: this interval is low enough, that a person in the room will be captured, yet it also reduces false detection issues.
The data is processed every 1 minute, but because Workplace is mainly interested in changing values:
if there is a value change, this change is documented
if there is no value change compared to the last message, the data is stored after max 10 minutes. This means that in Workplace, you might see “last update from the sensor received 4 minutes ago”
Pointgrab Accuracy
PointgrabXOVIS Accuracy
XOVIS provides highly accurate data on Presence Traffic Line detection, yet some factors might impact people detection:
Make sure lights are turned on/there is enough daylight. It should not be too dark in the room
Nothing should be blocking the sensor detection area
items might be suspended from the ceiling (eg HVAC or light fixtures)
items might be too high and block visibility (eg high back chairs or office screens)
Reflections in windows (might be avoided by restricting count area in the configuration)
Installation needs to be level (not tilted)
Installation location: make sure to verify measurements (height + length/width) in the config platform
Find more information on
https://www.pointgrabxovis.com/our-product/
https://www.pointgrab.com/wp-content/uploads/2018/04/CogniPoint-Data-Sheet.pdf
Search
| Live Search |
|---|