The following information describes the technical details of setting up the integration on the WMP side without the use of the Module activation. These are all automatically taken care of in the module activation. This is therefore only relevant as technical background information and can be used for debugging if the setup does not work properly.

Navigate to client settings, "Setup" and make a note of the client reference

Click tab "Authentication"

Scroll down, click tab "External apps"

Click "Create analytics"

Make a note of the external app reference and set commission to "Active"

• Open the tab "Trust relations"

• make a note of the "Access ID"

• make sure that the "Key type" is set to "Integration secret key", change if necessary

• check if the "Authorized system user" is set to an active user with access to Analytics data, change if necessary

• click on "password protected"

If "password protected" is not shown, make sure that your user is member of the group "license editor"

• Click "Reveal secret key"

• Provide your password. Note that when your user is a partner user, using the partner password is currently not supported, which means that you need to generate a personal password for your user. This is supported from the january release onwards, so from that time on you can use the partner password.

Now you have all the information that Analytics needs to connect, forward this info to them:

1. server: the Axxerion subdomain that the client is using (for example "myclient.axxerion.com")

2. client reference: the unique identifier of the client Axxerion environment, (for example "clientabc")

3. external app ID: see notes above

4. access ID: see notes above

5. secret key: see notes above