...
Inquire the list of the sensors (Sensors ID) and import those into Bohemian https://studio.cobundu.com/app/bohemian.
- for TABS motion sensors: You can either check for Tab sensor IDs with your customer or you can request in your MCS ticket following the hardware shipment (ref Request Cobundu hardware) from which boxes were the sensors taken?
In the following documents, you will find inventory files. Sensors are treated First In First Out.If you just filter on the box numbers you’ll see all the sensors in that box.
! Please mind: there are 100 sensors in 1 box, so in case your customer did not buy a multiple of 100, some IDs mentioned in this list do not belong to your tenant.
Date Inventory File 09/2020 4890-190618017 (2).xls 11/2020 2020925-WSMS-130(MS EU 7500PCS)-SPACEWELL-SHIPPINGDATA.xlsx
You should use download/upload excel function of the bohemian with correct sensor ID, Sensor Model and organization.
Even if the Sensor ID on the TAB might have a different format (58A0-CB00-...), the upload in Studio tenant needs to happen with a dash separating every 2 characters (58-A0-CB-00-..)
The Sensor ID is in HEX, so only 0-9; A-F characters are used. All letters are in CAPS.
Make sure all your sensors are deployed in Bohemian before you use them in your tenant.
Please be aware that only after the next data package is send, data for this sensor will be visible in your tenant. (This means that depending on time of upload to Bohemian and activity at the customer site, this can take a while.)
Deploying sensors in Studio
...