...
- Press the reset button (small button at the back of the gateway next to the USB-C port) for 5 seconds until the LED blinks rapidly GREEN<->RED for a couple of times.
- Hold the SETUP (button at the top of the gateway, next to the LED) for 10 seconds until the LED blinks rapidly in RED.
- The gateway now exposes a WiFi AP whose SSID is MINIHUB-xxxxxx where xxxxxx is the last 6 digits of the gateway ID.
- The password for this network is printed on the back panel of the device under WiFi PW.
- After connecting to this network go to 192.168.4.1 using a web browser to access the WiFi config page:
Select the WiFi network and enter the password if it’s a closed network.
Select the “Save and Reboot” option.
If your config is right, The the gateway will blink GREEN for a few seconds while it connects to this network.
Then, it will blink GREEN<->RED for a few seconds while it connects to the CUPS
endpoint and fetches the necessary information to connect to the LNS traffic
endpoint.If your configuration was successful, the LED will be solid GREEN which means that the
gateway is connected to the LoRaWAN network and is ready to handle packets .(Spacewell Cobundu SPOC is able to check this)
Additional Information
Operating Modes
...