This guide focuses on the configuration of the Pointgrab devices on the Pointgrab cognipoint management system (cpms) and Studio.
This guide assumes a configured asset tree in cpms with floorplan.

For a more detailed understanding of the CPMS please consult the manual.

...

Deploy sensors in CPMS

Link the device ids from the physical installation to the sensors device name (include area name, customer name (eg customer_area_floor number_room number_X))

...

! Remember that even if the Detection Area might be large enough to cover more than 10 work places, CPMS has a limit to max 10 areas per device, so if you create more in CPMS, the device will appear offline.

Finetune CPMS

Finetune the location of the area and the sensor device by comparing the live view and the on site situation

...

Deploy sensors in your Cobundu tenant 

For Spacewell external users: please contact your Implementation Consultant and indicate your tenant and the relevant CPMS area names that need to be mapped in Studio.

For Spacewell Implementation consultantsConsultants:

• using your multi-tenant account (see STUDIO), you can create/modify CPMS areas in Studio. The drop down list starts at CPMS site level.
• make sure your CPMS customer is added to cpms app-account MCSs2. (Every time you add a new branch, you must also give access to see this branch for user MCSs2, which is used by Cobundu): CPMS -> User Manager -> Find MCSs2 -> Edit -> Click on Assets Tree -> setup all needed checkboxes check boxes -> click Apply -> click Save on the main window
  

Inquire the list of the sensors (Sensor area IDs) and import those into your tenant on Studio (https://studio.cobundu.com).

...

1. Go to your tenant (https://studio.cobundu.com)
2. Go to Devices < "Add New Device"
3. Select "Pointgrab" as Device Type
   1. this will automatically select the relevant channels for Pointgrab (Headcount, Footfall-in and Footfall-out)
   2. if you want to disable one or more of these channels (eg in your project, the Pointgrab devices will only be used for Headcount), you can click on the "Advanced" button and scroll down to modify Advanced Sensor Details. Only do this after approval of your Spacewell Consultant.
4. Select the detection area (that has been set up in CPMS beforehand) from the Device ID drop down list

   1. Because the Device ID drop down list includes ALL CPMS tenants, it's not possible to select CPMS device ID by using a tenant-direct-login in Studio. For Spacewell external users: please contact your Implementation Consultant and indicate your tenant and the relevant CPMS area names that need to be mapped in Studio.

5. Give a meaningful name: include device name, customer name (eg customer_floor number_area)
   
   1.  Make sure device ID is referenced everywhere + location , so that in Studio you can use the simple search function 
6. Map against the installation location
7. Save/Submit your changes
   

...

Quality Assurance

Next step is the Quality Assurance to make sure that the whole installation and configuration of your Pointgrab devices was a success.