...
Table of content
| Table of Contents |
|---|
No actions needed on TTN platform
Tracknet Tabs sensor communicate with through encrypted LoRa with the hub, who will send the data to The Things Network (TTN) (LoRa platform).
- the sensors cannot be configured on TTN platform
- the data is automatically forwarded to Cobundu
Motion sensor – PIR
This sensor can not be configured on TTN.
Legacy (from before 2020 // for use without caps):
...
This sensor can not be configured on TTN.
Door & Window switch
This sensor can not be configured on TTN.
...
Deploy sensors in Studio
Inquire the list of the sensors (Device ID)
...
Selecting the correct Device Type "TrackNet-Motion-v1.3" should automatically set the Channel to "pir" and Type to "Presence".
Healthy home – Comfort
Selecting the correct Device Type "TrackNet-Humidity-v1.3" should automatically set
- the Channel to "humidity" and Type to "Humidity"
- the Channel to "temperature" and Type to "Temperature"
Door & Window switch
Selecting the correct Device Type "TrackNet-DoorWindow-v1.3" should automatically set the Channel to "open" and Type to "Pulse".
(some background info: Door counter sensors can come in 2 ways:
- pulse = sensor sends "pulses" to Cobundu, and Cobundu must count how many pulses have been made
- counter = sensor sends counter value to Cobundu - and this value used
...
Quality Assurance
Next step is the Quality Assurance to make sure that the whole installation and configuration of your Tracknet devices was a success.