...

Finetune the location of the area and the sensor device by comparing the live view and the on site situation

Deploying sensors in

...

your tenant 

Status 1/08/2021: because the Device ID drop down list includes ALL CPMS tenants, it's currently not possible to select CPMS device ID by using a tenant-direct-login in Studio. Please contact Julie or Ragavendra per mail, and indicate your tenant and the relevant CPMS area names that need to be mapped in Studio.

Inquire the list of the sensors (Sensors ID) and import those into Bohemian your tenant on Studio (https://studio.cobundu.com/app/bohemian).

 You should use download/upload excel function of the bohemian with correct sensor ID, Sensor Model and organization/tenant.

Make sure all your sensors are deployed in Bohemian before you use them in your tenant.

Please be aware that only after the next data package is send, data for this sensor will be visible in your tenant. (This means that depending on time of upload provisioning to Bohemian your tenant and activity at the customer site, this can take a while.) Image Removed

1. Go to bohemian your tenant (https://studio.cobundu.com/app/bohemian)
2. Check the Auto-create organization devices box
3. Add a new line
4. Select the pointgrab source
5. Select the detection area from the device id drop down list)
6. Go to Devices < "Add New Device"
7. Select "Pointgrab" as Device Type
   1. this will automatically select the relevant channels for Pointgrab (Headcount, Footfall-in and Footfall-out)
   2. if you want to disable one or more of these channels (eg in your project, the Pointgrab devices will only be used for Headcount), you can click on the "Advanced" button and scroll down to modify Advanced Sensor Details. Only do this after approval of your Spacewell Consultant.
8. Select the detection area (that has been set up in CPMS beforehand) from the Device ID drop down list
   1. Status 1/08/2021: because the Device ID drop down list includes ALL CPMS tenants, it's currently not possible to select CPMS device ID by using a tenant-direct-login in Studio. Please contact Julie or Ragavendra per mail, and indicate your tenant and the relevant CPMS area names that need to be mapped in Studio.
9. Give a meaningful name: include device name, customer name (eg customer_floor number_area)
10. Select pointgrab as the model
11. select the correct organisation
12. click save
    
13. Change the location id in the tenant's sensor devices

...

1. 1. Make sure device ID is

...

1. 1. referenced everywhere + location , so that in Studio you can use the simple search function 

...

2. Map against the installation location
3. Save/Submit your changes