Versions Compared

Version Old Version 6 New Version 7
Changes made by

Julie Isebaert

Julie Isebaert

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Check the state of your sensors in Health Monitor

The “sensor health” is defined based on that is visible in Studio is derived from when the sensor was last seen by COBUNDU based on the sensor’s heartbeat. Since every type of sensor has its own heartbeat frequency, the health of the sensor is evaluated per sensor type.

Please see below for the details of the “health thresholds” per sensor type.

 

Image Removed

 

Table of Contents

KPI Health Cards for a global overview

  • Go to https://studio.cobundu.com/
  • Login with your credentials
  • Select your tenant
  • Select Sensor Data
  • Select Health Monitor: next to data, every sensor also sends packages indicating they are still live
  • Select a floor and a sensor type (Selecting “all sensors types” is also possible)
  • Each room on the floor drawing has a color indicating the health of all sensors linked to that room.
  • Choose either Spaces or Devices, to see the KPI Health Cards at the top
  • In Devices, select a card to filter the overview below to show devices with that status.

Health Cards

• Unlinked devices: how many devices are set up for this tenant but not linked to a location?
• Linked devices: how many devices are linked to the tenant, or (if a location has been selected) to the selected location?
• Live devices: how many devices regularly communicate with the Cobundu platform?
• Devices to check: How many devices in the selected location have difficulty reaching the Cobundu platform? (see Sensor Health Logic below)
• Offline Devices: How many devices in the selected location are not connecting to the Cobundu platform? (see Sensor Health Logic below)

 

Image Added

 

Spaces: Location Hierarchy and Overview

  • Login with your credentials
  • Choose Spaces

Location hierarchy has a color icon showing the worst status of sensors in that location (if 1 sensor in the floor is red, and 100 are alive: the icon will be red)

‪Location overview shows how many/which locations are underlying, how many devices are underlying and what is their connection status (ref sum is visible in KPI health cards).
Image Added

Devices Floor plan to zoom in on problematic locations

  • Go to https://studio.cobundu.com/
  • Login with your credentials
  • Choose Spaces and drill down to a floor level in the location hierarchy
  • Select "Floor plan" visualization
  • If you want to drill down even more: Select "view by" (type)

 

Image Added

 

 

Legend

    • active/green: sensor is actively sending data to Cobundu
    • limit/orange: sensor is not able to always reach a hub/data is not coming in regularly into Cobundu*
    • bad/red: Cobundu is not receiving data from the sensor
      • if it says "never": could be sensor ID is not correct (check for typos)
    • white: there is no sensor linked to this location

 

* Might be due to local issues with a hub (eg changes to splitter; hub removed or plugged out), and sensors are able to reach hubs that are further away. In order to find out more, check Sensor connectivity guide

 

If more than 1 sensor is linked to a location (eg motion sensor + comfort sensor placed in the same meeting room), Health Monitor will display the color of the least healthy sensor
(eg location might be red because of the 2 sensors linked to this location, 1 is not sending data anymore)

Possible actions:
  • mouse-over on location contains following information, for all sensors linked to this room
    • sensor source (what kind of sensor)
    • sensor channel (pir, headcount, humidity, temperature, ...)
    • sensor ID
    • Last seen: "x minutes/hours/days ago"
  • clicking on the location brings you to Sensor Devices, where filter is set to this location

 

Sensor Health Logic

Image Added

‪Sensor Health is derived from when the sensor was last seen by COBUNDU based on the sensor’s heartbeat. Since every type of sensor has its own heartbeat frequency, the health of the sensor is evaluated per sensor type.
‪
‪
This table shows the details of the “health thresholds” per sensor type:
 ❤ heartbeatGreenYellowRed
Default <2D5D>7D
Tabs1H<2h1D>2D
Bosch1D (ack)<1D1h2D>3D
Ascoel1D<2D5D>7D
Pointgrab,
Building IQ		15-60s<5m15m>1h
LogicLinkTBD<2D5D>7D

...