Versions Compared

Version Old Version 1 New Version 2
Changes made by

Julie Isebaert

Julie Isebaert

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Go to https://studio.cobundu.com/
  • Login with your credentials
  • Select your tenant
  • Select Sensor Data
  • Select Health Monitor: next to data, every sensor also sends packages indicating they are still live
    • depending on the sensor, these packages are send more/less frequently, so depending on the sensor, it might take longer before the Health Monitor indicates a change in the health level of the sensor

Image ModifiedImage Added

Legend:

    • active/green: sensor is actively sending data to Cobundu
    • limit/orange: sensor is not able to always reach a hub/data is not coming in regularly into Cobundu*
    • bad/red: Cobundu is not receiving data from the sensor
      • if it says "never": could be sensor ID is not correct (check for typos)
    • white: there is no sensor linked to this location

* eg, might be due to local issues with a hub (eg changes to splitter; hub removed or plugged out), and sensors are able to reach hubs that are further away

Image Modified

If more than 1 sensor is linked to a location (eg motion sensor + comfort sensor placed in the same meeting room), Health Monitor will show the worst status of all these sensors (eg location might be red because of the 2 sensors linked to this location, 1 is not sending data anymore)

Image Modified

possible actions:
  • mouse-over on location contains following info:
    • sensor source
    • sensor channel
    • sensor ID
    • Last seen: "x minutes/hours/days ago"
  • clicking on the location brings you to Sensor Devices, where filter is set to this location