...
When removing the magnets for the first time, the device will automatically send a join request to the LoRa-hub (visit 2.1 Hardware to check compatibility between these sensors and our gateways/hubs).
*Tip : Make sure the device is set up on the server before removing the magnets for the first time.
- The range is shorter than standard LoRa, due to the smaller antenna and narrow openings in which the sensor is used. The range is more likely to be close to a good Wi-Fi network.
- Number of sensors per hub is irrelevant (500 - 1000 per hub)
If you have removed the magnets, and you need to manually join the device, take one of the magnets and move it to the round edge (Magnet sensor 2) of the Strip 3 times ( 3 green LED blinks at the Sensative logo ). This will send a join request to the server:
...