Versions Compared

Version Old Version 1 New Version 2
Changes made by

Julie Isebaert

Julie Isebaert

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Difficulty: expert

Content

Table of Contents
minLevel1
maxLevel1

Learning Objectives

After reading this article, you’ll be able to:

  • Configure Doorcounter Dashboard

  • Request the dashboard

  • Validate dashboard setup

Required Setup

Check the presentation with required configuration in IWMS and Cobundu Studio for optimal use of the dashboards on the Dashboard manuals chapter page

‪Map Cobundu

Below instructions are specific to the Doorcounter dashboard. Make sure to also check the FAQ in Dashboard activation.

  1. ‪Map Workplace Space Category with IWMS Room Classifications as described in Tenant Setup

    Cobundu

    . For the doorcounter dashboard, Workplace Space Category “Sanitary”

    vs

    is added. We suggest you map relevant IWMS Room Classifications such as “Showers”, “toilets” etc

    1. Doorcounter Dashboard only considers Work Spaces, Concentration Spaces, Collaboration Spaces and Sanitary Spaces.

      ‪" Other " (default category) is not considered by Doorcounter Dashboard.

      Image Modified

  2. In the Door Counter Doorcounter Dashboard, m2 is square meters are used to calculate usage of the room (eg for example for cleaning purposes*)
    In MCS: indicate per door counter sensor the total m2 in the MCS Room object (so incl. cubicles, stalls etc)

    in Axxerion:

    1. Image Removed
KPI on doorcounter/square meters is used for cleaning purposes:

  1. There are different use cases* possible, but the

idea remains the same

  1. main question will always be: how many times is this door opened per SQM = how much is this room used?). So make sure to fill in SQM per room object in IWMS.

* Compare:

  • 100 times opening toilet stall (or shower) door

  • 100 times opening "main toilets-door to the hallway"

  • 100 times opening restaurant/cantina door

Image Added

Image Added

3. Sensor installation was done according to instructions

[Spacewell Internal : In case you have any questions on where information in the dashboard is coming from or how it is set up, you can check DASHBOARD CONFIGURATIONS GUIDELINES ]

Request Dashboard setup

Request the Parking Monitor Dashboard with your Spacewell Account Manager.
After the sensors are sending data to the Workplace IoT platform, your Spacewell Implementation consultant will book a Spacewell internal ticket to request the dashboard to be set up.

Quality Assurance

Keywords relevant to dashboards

Filter

KPI

‪Full screen vs Exploration Menu (to change graph values)

‪Expected patterns: eg values lower at night/weekends

‪Anomaly: eg values being 100%; values showing 0% during week days

Summary Page

Expand

Doorcount OVERVIEW page

Expand

Doorcount ANALYIS page

Expand

Doorcount COMPARISON page

Expand

Doorcount Scope & Capacities page

Expand

If you notice anything strange on the dashboard, consider the following:

  • Check config of sensors in Studio (Sensor Devices: correct Device ID, linked to Room or Workplace object, linked to Zone etc)

  • Check config of floorplans in Studio (and IWMS if relevant)

  • Check locations master data in IWMS + config of locations in Studio Location Grouping and Room Capacity

  • Check Dashboards Space category mapping in Studio > Settings > Dashboards

  • Check installation of sensors + on-site environment (might be empty due to Covid or warmer due to climate)

  • If any values are off the charts, book a call for the BI team to check the incoming values (Incidents > Cobundu Incidents > Nature: Cobundu Dashboards)

Search

Live Search