Required configuration in IWMS and Cobundu Studio for optimal use of the dashboards: Dashboards IWMS & Studio Setup.pptx
A general introduction to the Dashboards has been presented during the Cobundu Summer 2021 Sessions, this is the recording: Summer 2021 Session: Dashboards
Frequently Asked Questions on Dashboards
...
| Ui expand | ||
|---|---|---|
| ||
The "hour/day chart" or "Average occupancy per hour" visualization is what is called a “tabbed container” (a widget nesting several charts). Tabbed containers cannot be exported as such, but you can export the individual charts. Right click on a chart to get the export option
|
| Ui expand | ||
|---|---|---|
| ||
When exporting the data of the floorplan, it lists the location ID but not the location reference. This makes it very difficult to interpret in the export. The room_name is used as “tooltip” on the floorplan that shows when you hover over it. Within Cobundu, we need the room_id as a dimension to keep the relation between the polygon and the room data. The export from the floorplan therefore has this room_id and not the room_name which is only a display parameter. As a workaround, there is a spaces table in the Scope & Capacities sheet which you can export, and that maps the location id with reference and other paramameters. |
...
| Ui expand | ||
|---|---|---|
| ||
This is currently not possible because we are embedding Qlik Sense dashboards in the product portal, where the designer menu is deactivated. We have investigated turning this menu on depending on specific roles & rights, but there is a certain security breach as end-users could access our Qlik backend hub that has all tenant streams … so currently this is not possible. |
...
Valid for ALL sensors: for the sensors to eventually turn up in the dashboards, the sensors need to be triggered. It's up to the IC to judge, depending on the customer situation (activity going on or not), if all sensors need to be triggered upon installation, or if it will be done by end users.
...
| Child pages (Children Display) | ||
|---|---|---|
|
Time Zones
Time Zone settings for sensors are required for all tenants; the system will however try to determine it depending system settings either from IWMS or from Cobundu by means of a waterfall system, if one is detected it exit’s and uses that setting (ignoring the rest).
Using the wrong setting will result in offset in the week overview. Changing the time zone will not recursively correct earlier sensor recordings, this needs then to be manually triggered by the Cobundu team.
...