Required configuration in IWMS and Cobundu Studio for optimal use of the dashboards: Dashboards IWMS & Studio Setup.pptx
...
Difficulty: novice
Content
| Table of Contents | ||||
|---|---|---|---|---|
|
Learning Objectives
After reading this article, you’ll be able to:
Frequently Asked Questions on Dashboards
...
Workplace Dashboards are build on Qlik, a 3rd party application
...
.
...
| Expand | ||
|---|---|---|
| ||
Make sure that the Display resolution is recommended for the used screen size and that the scale is set to 100% - then dashboard features like the Average Occupancy Per Hour Grid should come up nicely, also when making the browser a bit smaller than full screen. |
...
|
...
|
...
| Expand | ||
|---|---|---|
| ||
The "hour/day chart" or "Average occupancy per hour" visualization is what is called a “tabbed container” (a widget nesting several charts). Tabbed containers cannot be exported as such, but you can export the individual charts. Right click on a chart to get the export option
|
...
|
...
| Expand | ||
|---|---|---|
| ||
When exporting the data of the floorplan, it lists the location ID but not the location reference. This makes it very difficult to interpret in the export. The room_name is used as “tooltip” on the floorplan that shows when you hover over it. Within Cobundu, we need the room_id as a dimension to keep the relation between the polygon and the room data. The export from the floorplan therefore has this room_id and not the room_name which is only a display parameter. As a workaround, there is a spaces table in the Scope & Capacities sheet which you can export, and that maps the location id with reference and other paramameters. |
...
| Expand | |
|---|---|
|
...
|
...
This is currently not possible because we are embedding Qlik Sense dashboards in the product portal, where the designer menu is deactivated. We have investigated turning this menu on depending on specific roles & rights, but there is a certain security breach as end-users could access our Qlik backend hub that has all tenant streams … so currently this is not possible.
You can now also save your filter selections by creating your own bookmarks
All bookmarks (default (public) and own) are available under the bookmark button
 |
Valid for ALL sensors: for the sensors to eventually turn up in the dashboards, the sensors need to be triggered.
...
| Note |
|---|
If none of the sensors linked to a specific |
...
zone are triggered, the |
...
zone will not show up in the dashboard. On the other hand: not triggered sensors generally means that zone is not |
...
used… |
Time Zones
Time Zone settings for sensors are required for all tenants; the system will however try to determine it depending system settings either from IWMS or from
...
Workplace by means of a waterfall system
...
: if one is detected
...
, that setting is used (ignoring the rest of the waterfall steps).
Using the wrong setting will result in offset in the week overview. Changing the time zone will not recursively correct earlier sensor recordings, this needs then to be manually triggered by the
...
Workplace development team.
...
Search
| Live Search |
|---|