...
- the sensors cannot be configured on TTN platform
- the data is automatically forwarded to Cobundu
Motion sensor – PIR
...
This sensor can not be configured on TTN.
Deploy sensors in Studio
Inquire the list of the sensors (Device ID)
...
| Date | Inventory File |
|---|---|
09/2020 | 4890-190618017 Tabs (2Tracknet) .xlsconfiguration guide |
| 11/2020 | 2020925-WSMS-130(MS EU 7500PCS)-SPACEWELL-SHIPPINGDATA.xlsxTabs (Tracknet) configuration guide |
1/2021 | |
| 1/2021 | |
2/2021 | |
| 2/2021 | |
| 2/2021 | |
| 09/2021 | |
| 09/2021 | |
| 02/2022 | |
| 06/2022 | |
| 06/2022 | |
| 06/2022 |
*There are no box IDs available for the US.
Prepare Import Excel
Provide the rooms template and floor plans to the customer: A clear indication of the area where the sensors must/will be installed.
As described in the installation guide, make sure to have the stickers or clearly take note of the 8 last digits of the sensor number in “Device ID #” column.
Concerning the TAB sensor, be aware that there are 2 numbers on a sensor, the ID that starts with 58-A0-CB-00 is the one that we need during the configuration.
Even if the Sensor ID on the TAB might have a different format (58A0-CB00-...or E8E1-E100-...), the upload in Studio tenant needs to happen with a dash separating every 2 characters (58-A0-CB-00-... or E8-E1-E1-00-...)
The Sensor ID is in HEX, so only 0-9; A-F characters are used. All letters are in CAPS.
Device | Device Type |
Tabs Motion | TrackNet-Motion-v1.3 |
Tabs Comfort | TrackNet-Humidity-v1.3 |
Tabs Door/Window counter | TrackNet-DoorWindow-v1.3 |
Manually Add New Device in Studio
You can manually add a record via "Add New Device"
Manually add device through location > devices > new: location is filled in. Select Device Type. This will automatically link the device channel (eg PIR for motion sensors). In case of generic sensors, use Advanced to select relevant channels. Advanced is still under construction.
Enter Device ID as mentioned on the sensor. Enter a meaningful Device Name (eg customer_floor number_area). Select a Location from the location tree if this is already known. Next to the already selected (main) Room, you can visualize the incoming data on other, Linked Locations. Imagine having 1 comfort sensor in an open office space and you want to visualize this data on all 8 workplaces in that space: Linked Location needs to contain all 8 workplaces. |
...
Motion sensor – PIR
Selecting the correct Device Type "TrackNet-Motion-v1.3" should automatically set the Channel to "pir" and Type to "Presence".
Healthy home – Comfort
Selecting the correct Device Type "TrackNet-Humidity-v1.3" should automatically set
- the Channel to "humidity" and Type to "Humidity"
- the Channel to "temperature" and Type to "Temperature"
Door & Window switch
Selecting the correct Device Type "TrackNet-DoorWindow-v1.3" should automatically set the Channel to "open" and Type to "Pulse".
...
- pulse = sensor sends "pulses" to Cobundu, and Cobundu must count how many pulses have been made
- counter = sensor sends counter value to Cobundu - and this value used
...
Quality Assurance
Next step is the Quality Assurance to make sure that the whole installation and configuration of your Tracknet devices was a success.