| Info |
|---|
Keep in mind: If you’re setting up a Workplace Management-Experience Integration, this module activation is step 4 in theWorkplace Experience integration: Setup guide. Finish up steps 1 to 3 before starting this activation. Steps 5 and further in that article can be done after completing this module activation. Those steps go into detail on some of the often used additional options in this integration. |
| Table of Contents | ||
|---|---|---|
|
...
This module activation is about the integration of the Reservation module and relevant master data with Workplace Experience. For more information on the content of these modules, including detailed descriptions of some of the core components, see these articles in the Application Managers part:
Master data: Asset module (applicable based on the setting in the module activation down below)
Master data: Catalog items (applicable based on the setting in the module activation down below)
...
| Note |
|---|
When importing buildings and areas make sure to apply the mandatory hierarchy. If this is not done properly, this will result in issues when mapping areas and workplaces in Workplace Experience. |
4.3.1 Mandatory hierarchy for buildings and areas
Main area
For every building that is created in WPM, a main area is created with the category ‘Main area’. Do not make any changed to the main area! All floors and areas that are created for this building will be placed hierarchically below this main area.
...