Versions Compared

Version Old Version 15 New Version Current
Changes made by

Julie Isebaert

Gilles Ghyssaert

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Difficulty: expert

Content

Table of Contents
minLevel1
maxLevel1

Learning Objectives

After reading this article, you’ll be able to:

  • Install Qbic meeting room display devices

  • Perform initial configurations on Qbic devices

Prerequisites for all models

Expand
titleChoosing the Power plug vs. POE

The Displays can be powered in 2 ways.

  • Via a normal power adaptor, which is delivered together with the device.

  • or with Power over Ethernet (cable not included).

When choosing POE, you can use the the cable for network connectivity.

When choosing the power plug, you can connect the device using either a regular Ethernet cable or via Wi-Fi.

Expand
titleIT requirements

On the network, the devices must have HTTP & HTTPS access via port 80 & 443.
A Static IP is not required

Expand
titleMounting options

All devices can be mounted either using a TAPE or with SCREWS - both included in the box

In case a new tape needs to be procured, this is the one that comes with the devices (3M VHB:

Quick start guide per model

Expand
titleTD-1070
Image Removedimage-20241002-112138.pngImage Added
Expand
titleTD-1060

For the complete installation instructions (eg Surface preparation for applying adhesive tape) and removal instructions:

View file
nameTD1060 SLIM user manual.pdf

Expand
titleTD-1050

Preparing the device to install the app

Step 1: Power the device

The device will launch automatically after connecting it to a power supply.

The device does not have a fixed battery; therefore, it is important to maintain a stable power supply.

Step 2: Connect to the network

  • Connecting to a wired network happens automatically when plugging in the (POE) Ethernet cable.

    • Make sure Ethernet is enabled in your POE switch.

    • Specific configuration such as subnet mask, fixed IP etc. can also be configured via the device's home screen.

  • The wireless network can be configured via the app's home screen:

In case your device seems to be stuck in the booting process, you will need to reset the device: there is a hole labelled "reset" at the back. Power on the device and push a paperclip for 10 seconds in the reset hole (you should feel a click when pushing the reset button).

Step 3: Check firmware version

Make sure the latest version required firmware version is installed.

  • At least version v1.0.18 must be installed.

  • The version can be checked on the home screen (see screenshot below):

  • Upgrades of the firmware can be managed via remote Device Control for Kiosk App
     

Expand
titleManual firmware upgrade

This sub-step is only required when:

  • The firmware version is below v18 v1.0.18 – which all delivered devices should come preinstalled with. 

  • You are not using the remote device management console.

Option 1

  • Go to "Settings" > "Firmware update" > "Remote firmware upgrade URL"

  • Create a MCS Helpdesk ticket to receive the latest remote upgrade URL.

  • Click set

    • The update process starts in the background and can take several minutes before first changes can be observed.

Option 2

Step 4: Install the app using Spacewell Device Control

You have now successfully installed the Qbic Meeting Room Display. 

In order to further configure the device and install the Room Display app, follow the instructions for  Installing the Room Display app

Search

Live Search