Versions Compared

Version Old Version 20 New Version Current
Changes made by

Julie Isebaert

Julie Isebaert

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

. thisDifficultyDifficulty: expert

Content

Table of Contents
minLevel1
maxLevel1

Learning Objectives

After reading this article, you’ll be able to:

  • Configure the Kiosk App through Device Control to run on a Qbic meeting room display

This manual is applicable for the following meeting room devices

QBIC - TD-1070

QBIC - TD-1060

QBIC - TD-1050

Step 1 - Take your device and your PC

Expand
titleGet your Qbic device and laptop ready

Prerequisites

Step 3 - Install & Launch the app

Expand
titleInstall + configure the app

  • Select the Device(s) you would like to configure

  • Click Configure

    Image Removed

  • Toggle the button to “On” to change the device name, take for example the name of the meeting room you will link this to

    • Enter the device account (i.e. the device account that will be used to log into the Kiosk application) that

    1. You’ll need both a Qbic device + a PC

    2. Both devices should be on the same network

  • You should see the screen below on your Qbic device (the Content URL is empty at first):

    1. Wi-Fi Status

    2. QBIC IP address is listed

    • Image Removed

    ℹ️ To get your Qbic device ready and connected, consult the Hardware installation (Qbic)

    Expand
    titleUninstall any previously installed Kiosk app if any (skip this step for first time installation)

    Note: Only relevant if you are still running a Kiosk App that is not linked to Device Control.
    ℹ️ This step applies to any type of device (Qbic or other brands)

    Image Removed

    Image RemovedImage Removed

    Exit the app

    Find the app on the device

    Uninstall the app

    1. Tap 10x on the logo

    2. Enter the device password

    3. Select ‘Exit’

    1. For Qbic, select ‘Settings'

    2. go to ' Advanced settings’

    3. Select ' apps'

    1. Select the ' kiosk' app

    2. Select ‘uninstall’

    Step 2 - Find the Qbic device through your PC

    Expand
    titleGo to Device Control on your PC and log in with your administrator account.

    Open Device Control in your browser and choose ' kiosk' when you see this pop-up window

    Info

    We recommend using Chrome/Edge as browser on your laptop for this step

    Image Removed

    You should see this screen after logging in.

    Image Removed
    Expand
    titleEnable insecure browsing

    1. Click the lock button by the URL

    2. Click on “Site Settings”

    3. Navigate to “Insecure Content”

    4. Select “Allow”

      Image Removed

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#F4F5F7

    Note:

    Scanning is only possible on Chrome or Edge

    This is required to scan devices in an IP range.

    This setting is only applied to the current website, not all sites you visit.

    You can reverse this after you have finished Step 3

    Image Removed
    Expand
    titleScan an IP range to find your Qbic device

    1. Go to the Qbic Devices Tab on the Device Control platform

    2. Enter an IP range (based on the IP shown on the Qbic Settings Tile in Step 1)

    3. Press scan and wait for your device to show up

    Image Removed
    Info

    ‪The Qbic devices must be on the same network as the computer you’re trying to scan them from in this step. ‪To check if your Qbic device is reachable you can ping it via Command line.

    • Image Removed

    1. Create a device account (i.e. the device account that will be used to log into the Kiosk application) in Users & Groups

    2. Ideally, you’ve already configured a Profile and a Theme, see Customizing the Room Display

    Step 1 - 3 - Install & Launch the app

    see Device Control for QBIC

    Step 4 - Configure the app

    (warning) If your device account is already in use by another Kiosk app, you will receive an error message. You’ll have to go to https://devicecontrol.cobundu.com/ and unlink the account used by the other kiosk.

    Image Removed

  • Toggle “Content” On, Choose “App” and then select the Option: Remote Upgrade XML* in combination with Spacewell Kiosk (the URL will be set automatically by Device Control).

    Image Removed

  • Optional: Schedule a Daily Reboot or On/Off Times and choose if you want you want a keypad volume when users type on the keyboard

  • Get the latest firmware: Go to this page and copy the URL of the Qbic device you’re configuring from the bottom of that page and enter it in the Firmware XML field

    Image Removed

  • Press save to push the configuration to the device(s). You will see a status report and any potential errors here. ‪

  • Wait a few seconds. Your QBIC device(s) will show a link in the “content field“ and start a countdown to launch the app. If you see no Content link, then you must manually select the “kiosk app” from the dropdown list button next to the Content field.

    Image Removed

    • The app will launch and boot according. You can press Cancel Autoplay to launch the app immediately without having to wait.
    Image Removed

    *Which option should I use?
    Option 1 (XML URL): automatically updates the app with each new version (recommended)

    Option 2 (.apk upload): requires you to manually update the app when a new version is released. In this case:

  • Download the Android Kiosk App from the https://appstore.spacewell.com/ onto your computer

    • Toggle “Content” On, Choose “App” and then select the APK file from your PC.

    Image Added

    Expand
    titleOn the device, log in with the device account

    You will have to provide the device account that has been configured in Users & Groups

    Note
    Info
    Expand
    titleWait for the app to ask for a configuration

    If this is the first time you use the device account, the app will launch and give an error. Don’t panic, this is completely normal (wink) The app is asking which locations and profile to load.

    You’ll need your laptop for the next few steps.

    Image Added

    Expand
    titleOpen device control to set up the new app

    Go to https://devicecontrol.cobundu.com/ and log in with an admin account.

    You should see you new device in the list with a label “not configured” on the right.

    image-20240131-111139.pngImage Added

    Expand
    titleSelect the device and press START CONFIGURATION

    When you select the device, a panel will appear from the bottom. Click on Start configuration.

    image-20240131-111259.pngImage Added

    Expand
    titleSelect Room Display

    Select ROOM DISPLAY in the pop-up window that appears

    image-20240131-105443.pngImage Added
    Expand
    titleSelect Room + a profile & theme to be applied

    Select the Room you want to see values for, a Profile and a Theme using the drop down menus.

    These settings will be pushed to the Kiosk app after you pressed SAVE.

    You can customize this later at any point.

    Expand
    titleYou might need to go back to the device and tap 'retry'

    Once you pressed RETRY the app will continue it’s configuration

    image-20240131-110925.pngImage Added

    Expand
    titleCongratulations, you're ready!

    Now you’re good to go

    Search

    Live Search