Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 8 Next »

This manual is applicable for the following meeting room devices

QBIC - TD-1070

QBIC - TD-1060

QBIC - TD-1050

Prerequisites

 Get your Qbic device and laptop ready

  1. You’ll need both a Qbic device + a PC

  2. Both devices should be on the same network

  3. You should see the screen below on your Qbic device (the Content URL is empty at first)

ℹ️ To get your Qbic device ready and connected, consult the Hardware installation (Qbic)

 Uninstall any previously installed Kiosk app if any (skip this step for first time installation)

Note: Only relevant if you are still running a Kiosk App that is not linked to Device Control.
ℹ️ This step applies to any type of device (Qbic or other brands)

Exit the app

Find the app on the device

Uninstall the app

  1. Tap 10x on the logo

  2. Enter the device password

  3. Select ‘Exit’

  1. For Qbic, select ‘Settings'

  2. go to ' Advanced settings’

  3. Select ' apps'

  1. Select the ' kiosk' app

  2. Select ‘uninstall’

Step 1 - Find the Qbic device through your PC

We recommend using Chrome/Edge as browser on your laptop for this step

Open Device Control

 Go to Device Control on your PC and log in with your administrator account.

Choose ' kiosk' when you see this pop-up window

You should see this screen after logging in.

 Enable insecure browsing

  1. Click the lock button by the URL

  2. Click on “Site Settings”

  3. Navigate to “Insecure Content”

  4. Select “Allow”

Note:

Scanning is only possible on Chrome or Edge

This is required to scan devices in an IP range.

This setting is only applied to the current website, not all sites you visit.

You can reverse this after you have finished Step 3

  • No labels