Comfort Values visualized in dashboard
- Check the presentation with required configuration in IWMS and Cobundu Studio for optimal use of the dashboards on the Dashboard manuals chapter page
- Logic behind visualization: Average temperature value for room X (if 2 comfort sensors are linked to that room) = (10 °C +20 °C) / 2 = 15 °C and this is how it will be exposed in the timeslots. Check out the scenarios/use cases concerning the visualization of comfort data on Live Floorplan and in Dashboards on Live floorplan settings-page.
Comfort values set in Studio Settings > Plan influence the colors in the gauges in the Comfort Monitor dashboard
Quality Assurance
Please use following slide deck as a guide line of how to do a Quality Check on a brand new published dashboard:
If you notice anything strange on the dashboard, please consider the following :
- Check Deployment of listeners and jobs:
- Sensor Listener + Sensor Data Aggregation running?
- MCS API Connector enabled and latest version?
- Check config of sensors in Studio (Sensor Devices: correct Device ID, linked to Room or WP, linked to Zone etc)
- Check config of floorplans in Studio (and IWMS if relevant)
- Check locations master data in IWMS + config of locations in Location Grouping and Room Capacity
- Check Dashboards Space category mapping in Studio > Settings > Dashboards
- Check installation of sensors + customer environment (might be empty due to Covid or warmer due to climate)
- If eg comfort values are off the charts, book a call for the BI team to check the incoming values (Incidents > Cobundu Incidents > Nature: Cobundu Dashboards)
[Spacewell Internal : In case you have any questions on where information in the dashboard is coming from or how it is set up, you can check DASHBOARD CONFIGURATIONS GUIDELINES ]