Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 11 Next »

Prerequisites for all models

 Choosing the Power plug vs. POE

The Displays can be powered in 2 ways.

  • Via a normal power adaptor, which is delivered together with the device.

  • or with Power over Ethernet (cable not included).

When choosing POE, you can use the the cable for network connectivity.

When choosing the power plug, you can connect the device using either a regular Ethernet cable or via Wi-Fi.

 IT requirements

On the network, the devices must have HTTP & HTTPS access via port 80 & 443.
A Static IP is not required

 Mounting options

All devices can be mounted either using a TAPE or with SCREWS - both included in the box

Quick start guide per model

 TD-1070
 TD-1060

For the complete installation instructions (eg Surface preparation for applying adhesive tape) and removal instructions: TD1060 SLIM user manual.pdf

 TD-1050

Preparing the device to install the app

Step 1: Power the device

The device will launch automatically after connecting it to a power supply.

The device does not have a fixed battery; therefore, it is important to maintain a stable power supply.

Step 2: Connect to the network

  • Connecting to a wired network happens automatically when plugging in the (POE) Ethernet cable.

    • Make sure Ethernet is enabled in your POE switch.

    • Specific configuration such as subnet mask, fixed IP etc. can also be configured via the device's home screen.

  • The wireless network can be configured via the app's home screen:

In case your device seems to be stuck in the booting process, you will need to reset the device: there is a hole labelled "reset" at the back. Power on the device and push a paperclip for 10 seconds in the reset hole (you should feel a click when pushing the reset button).

Step 3: Check firmware version

Make sure the latest version required firmware version is installed.

  • At least version v1.0.18 must be installed.

  • The version can be checked on the home screen (see screenshot below):

  • Upgrades of the firmware can be managed via remote Device Control Platform
     

 Manual firmware upgrade

This sub-step is only required when:

  • The firmware version is below v18 – which all delivered devices should come preinstalled with. 

  • You are not using the remote device management console.

Option 1

  • Go to "Settings" > "Firmware update" > "Remote firmware upgrade URL"

  • Create a MCS Helpdesk ticket to receive the latest remote upgrade URL.

  • Click set

    • The update process starts in the background and can take several minutes before first changes can be observed.

Option 2

Step 4: Install the app using Spacewell Device Control

You have now successfully installed the Qbic Meeting Room Display. 

In order to further configure the device, install the Room Display app you can use the Device Control Platform (Kiosk App & Workplace App)

  • No labels