Difficulty: expert
Content
Learning Objectives
After reading this article, you’ll be able to:
Set up Quick Timeslots for all the touch points
Define Region specific settings
Regional settings are mainly used to steer the Kiosk app.
The Quick Timeslots are also used in other Workplace Touch points like GO web portal and Workplace app.
Start and End of Business Day are used in the dashboards.
How to access
Login with your credentials
Select Settings > Regional in the Studio 1.0 interface
Define Global settings (if your tenant only has buildings or uses Workplace in 1 region that uses the same Time Zone and measurements units)
or modify settings like time zones and temperature units for a tenant that has sites all over the world:
Language
Date Format
Time Format
Number Format
Start of Business Day
End of Business Day
Time zone setting is derived from IWMS configuration
Quick Timeslots: Define timeslots for touchpoints per site. These will be inherited by the Workplace touch points (Go, Workplace app, Kiosk app) to enable quick selection of start and end time while booking a meeting room or workplace. Each timeslot has a name, a start time and an end time.
Measurement system / Length Unit (eg relevant in below PLAN settings on Table Height or in the Opportunity Simulator when discussing sqm/sqf UOM)
The available options are "Metric/SI" (cm) and "Imperial/US" (inch)
Temperature Units (if applicable through temp sensor)
Pressure Units (if applicable through pressure sensor)
Impact per touch point
Setting / Touch points | Kiosk | Web - GO | Workplace App | Dashboards |
|---|---|---|---|---|
Time Zone | Applicable |
|
| |
Language | Applicable
|
|
|
|
Date format |
|
|
| |
Time format | Applicable
|
|
|
|
Number format |
| |||
Start of business day |
|
|
| Applicable |
End of business day |
|
|
| Applicable |
Quick time slots | Applicable
| Applicable
| Applicable
|
|
Measurement system | ||||
Temperature Units | ||||
Pressure units |
Search