This guide focuses on the configuration of the Pointgrab devices on the Pointgrab cognipoint management system (cpms) and Rhye.
This guide assumes a configured asset tree in cpms with floorplan.

For a more detailed understanding of the CPMS please consult the manual.

Deploying sensors CPMS

Link the device ids from the physical installation to the sensors device name

Manual mode:

1. Click the device manager tab
2. Search the device name in the list or by typing in the search box
3. Select the line of the device name
4. Click the link icon
5. In the Serial Number field, enter the serial number that is labeled on the sensor (with dashes).
6. Click Link and verify the sensor’s Link Status icon in the table

CSV mode:

1. Fill in the following csv file, and keep the format (number of enters between blocks, indenting, etc.)
   
   
2. 
   

Defining areas CPMS

Finetuning CPMS

Deploying sensors Rhye