Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

DifficultyMoeilijkheidsgraad: expert

Content

Inhoud

Table of Contents
minLevel1
maxLevel1

Learning Objectives

After reading this article, you’ll be able to:

  • Configure the Kiosk App through Device Control to run on a Qbic meeting room display

This manual is applicable for the following meeting room devices

Leerdoelen

Na het lezen van dit artikel zul je in staat zijn om:

  • Configureer de Kiosk App via Apparaatbeheer om te draaien op een Qbic vergaderzaalscherm


Deze handleiding is van toepassing op de volgende vergaderruimteapparaten

QBIC - TD-1070

QBIC - TD-1060

QBIC - TD-1050


Prerequisites

  • You’ll need both a Qbic device + a PC

  • Both devices should be on the same network

  • Create a device account (i.e. the device account that will be used to log into the Kiosk application) in Users & Groups

  • Ideally, you’ve already configured a Profile and a Theme, see

    Vereisten

    1. Je hebt zowel een Qbic-apparaat + een pc

    2. Beide apparaten moeten op de hetzelfde netwerk

    3. Maak een apparaataccount (d.w.z. de apparaataccount die zal worden gebruikt om in te loggen op de Kiosk-toepassing) in Users & Groups

    4. In het ideale geval heb je al een Profiel en een Themazie Customizing the Room Display

    Step

    Stap 1 - 3 -

    Install & Launch the app see

    De app installeren en starten

    zie Device Control for QBIC

    Step

    Stap 4 -

    Configure the

    De app configureren

    Expand
    titleOn the device, log in with the device account

    You will have to provide the device account that has been configured U moet de apparaataccount die is geconfigureerd in Users & Groups

    (warning) If your device account is already in use by another Kiosk app, you will receive an error message. You’ll have to go to Als je apparaataccount al in gebruik is door een andere Kiosk-app, krijg je een foutmelding. Je moet dan naar https://devicecontrol.cobundu.com/ and unlink the account used by the other kiosk en ontkoppel de account die door de andere kiosk wordt gebruikt.

    Expand
    titleWait for the app to ask for a configuration

    If this is the first time you use the device account, the app will launch and give an error. Don’t panic, this is completely normal (wink) The app is asking which locations and profile to load.

    You’ll need your laptop for the next few stepsAls dit de eerste keer is dat je het apparaataccount gebruikt, zal de app opstarten en een foutmelding geven. Geen paniek, dit is volkomen normaal (wink) De app vraagt welke locaties en welk profiel hij wil laden.

    Je hebt je laptop nodig voor de volgende stappen.

    Expand
    titleOpen device control to set up the new app

    Go to Ga naar https://devicecontrol.cobundu.com/ and en log in with an admin account. You should see you new device in the list with a label “not configured” on the rightmet een beheerdersaccount.

    Je zou je nieuwe apparaat in de lijst moeten zien met een label "niet geconfigureerd" aan de rechterkant.

    image-20240131-111139.png

    Expand
    titleSelect the device and press START CONFIGURATION

    When you select the device, a panel will appear from the bottom. Click on Start configurationWanneer je het apparaat selecteert, verschijnt er een paneel onderaan. Klik op Start configuratie.

    image-20240131-111259.png

    Expand
    titleSelect Room Display

    Select Selecteer ROOM DISPLAY in the het pop-up window that appearsupvenster dat verschijnt

    image-20240131-105443.png
    Expand
    titleSelect Room + a profile & theme to be applied

    Select the Room you want to see values for, a Profile and a Theme using the drop down menus.

    These settings will be pushed to the Kiosk app after you pressed SAVE.

    You can customize this later at any pointSelecteer de kamer waarvoor je waarden wilt zien, een profiel en een thema met behulp van de vervolgkeuzemenu's.

    Deze instellingen worden naar de Kiosk app gepushed nadat je op OPSLAAN hebt gedrukt.

    Je kunt dit later op elk moment aanpassen.

    Expand
    titleYou might need to go back to the device and tap 'retry'

    Once you pressed RETRY the app will continue it’s configurationZodra je op RETRY hebt gedrukt, gaat de app verder met de configuratie.

    image-20240131-110925.png

    Now you’re good to go

    Expand
    titleCongratulations, you're ready!
    Search

    Nu kun je aan de slag


    Zoek op

    Live Search