...
it depends on how many devices will connect; but overall for on average we assume 250MB of monthly data transfer so we suggest to take a SIM card for 1GB.
...
Hub Activation
Prerequisites
Requirements to the computer that you will use for the configuration:
- physical network input for ethernet cable (on mac we suggest to use an adapter)
- securities can be setup in so many different ways, it’s not possible to describe system requirements… The customer company should either provide a laptop that can connect to the outside world and/or whitelist the kerlink page.
...
- make sure your computer is connecting to the same network as the device
Activation Steps
1. Make sure you're connected to the device with an ethernet cable.
...
6. Check in TTN that the gateway is online (EUI (format 7076FF006404027E) can be found on the sticker at the back of the device).
Hub Installation
- If on 4G, connect the hub with the power cord to a plug
- If using the ethernet functionality, make sure the ethernet cableis connecting to the network
Check connection
In order to check the connection of the hub on the TTN platform, please communicate the EUI (format 7076FF006404027E), that can be found on the sticker at the back of the device, to your Spacewell consultant.
...