...
- the LEDs on the device will be
- 1st LED will be solid green = power status = connected to power
2nd LED = empty/always offcan be ignored
3rd LED = blinking green = LORA activity/connected (sending packages to LORA) (blinking will be higher in frequency once sensors installed)
→ To see if a hub is live ON the device, is only possible if all sensors are installed (operational mode), because then the 3rd blinking LED will be blinking more continuously
- the indicator on the TTN platform will be solid BLUE which means that the gateway is connected to the LoRaWAN network and is ready to handle packets (Spacewell Cobundu SPOC is able to check this based on the Board ID).
Troubleshooting
...