...
If you cannot go on site, it's best to set up a technical call with someone that has physical access to the hubs and where we can take over the pc.
Note: these settings are not persistent, if a hub is physically reset (reset button pushed for 10+ sec) the settings needs to be applied again
Summary
- Make sure you have putty installed https://www.putty.org/
- Connect your pc via ethernet to one of the black ethernet ports
- Copy firmware image and scp to Hub ( Frimeware image is available in the TEAMS Cobundu Sharepoint channel )
- Run the update
- Set CUPS MTUN and TC uri information
- Disconnect PC from ethernet cable
...