Difficulty: expert
Content
| Table of Contents | ||||
|---|---|---|---|---|
|
Learning Objectives
After reading this article, you’ll be able to:
configure Signify SC1500 sensors in Workplace
send Signify SC1500 data to Workplace
Data Stream Configuration
Signify to provide relevant interact data for the project
appKey
appSecret
URL
serviceId
serviceSecret
Spacewell consultant to provide this information to Spacewell development team through a Support ticket
Development to set up API connection with interact
Check /wiki/spaces/KB/pages/
edit-v2/737149606?draftShareId=0dcb23b8-1277-41d7-aaba-3d2e46e56f9c#Deploy-sensors-in-Workplace-Platform| Info |
|---|
The data stream setup needs to be done once, then it will be possible to add new builds/areas in scope. |
Deploy sensors in Workplace Platform
Add New Device in Workplace back-end Studio
Go to your environment (https://studio.cobundu.com) and log in
Select the location, where you can manually add a sensor via "Add New Device"
Manually add device through location > devices > new: location is filled in.
Select Device Type "Signify Occupancy". This will automatically link the device channel.
In Device ID, select the relevant area for this location.
Enter a meaningful Device Name (eg customer_floor number_area).
Select a Location from the location tree if this is already known (automatically filled in if location was selected before adding new device).
Linked Locations is not relevant for this kind of sensor.
Selecting the correct Device Type "Signify Occupancy" should automatically set the Type to "Presence" and the Channel to “PIR” (see Advanced).
For more information on how to add multiple new devices to Studio, check out Configure devices (add, remove, import, and export).
Quality Assurance
Next step is the Quality Assurance to make sure that the whole installation and configuration of your Motion sensor was a success. See Quality Assurance Occupancy and Utilization Sensor
Search
| Live Search |
|---|