Versions Compared

Version Old Version 11 New Version Current
Changes made by

Julie Isebaert

Julie Isebaert

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Difficulty: expert

Content

Table of Contents
minLevel1
maxLevel1

Learning Objectives

After reading this article, you’ll be able to:

  • Perform initial configuration on QBIC Android kiosks

  • Install the Kiosk App to run on QBIC Android kiosks

After installing the Kiosk Hardware according to Kiosk Hardware Installation, the device will launch automatically after connecting it to a power supply.

Booting the Kiosk for the first time

Step 1: Power the device

The device will launch automatically after connecting it to a power supply.

The device does not have a fixed battery; therefore, it is important to maintain a stable power supply.

Step 2: Connect to the network

  • Connecting to a wired network happens automatically when plugging in the (POE) Ethernet cable.

    • Make sure Ethernet is enabled in your POE switch.

    • Specific configuration such as subnet mask, fixed IP etc. can also be configured via the device's home screen.

  • The wireless network can be configured via the app's home screen:

In case your device seems to be stuck in the booting process, you will need to reset the device: there is a hole labelled "reset" at the back. Power on the device and push a paperclip for 10 seconds in the reset hole (you should feel a click when pushing the reset button).

Step 3: Check firmware version

Make sure the latest version required firmware version is installed.

  • At least version v1.0.18 must be installed.

  • The version can be checked on the home screen (see screenshot below):

  • Upgrades of the firmware can be managed via remote Device Control for Kiosk App
     

Expand
titleManual firmware upgrade

This sub-step is only required when:

  • The firmware version is below v18 – which all delivered devices should come preinstalled with. 

  • You are not using the remote device management console.

Option 1

  • Go to "Settings" > "Firmware update" > "Remote firmware upgrade URL"

  • Create a MCS Helpdesk ticket to receive the latest remote upgrade URL.

  • Click set

    • The update process starts in the background and can take several minutes before first changes can be observed.

Option 2

Step 4: Define Landscape or Portrait mode

In Settings > Display > HDMI, select “System Direction”. It looks like a title, but you can click it to open a pop-up that will let you choose between 0, 90, 180 or 270 degrees.

In a sense, it let’s you choose between using the screen in landscape or portrait mode.

image-20240628-161437.png
Info

Once you install the Kiosk app in the next step, it will switch automatically to the relevant Landscape or Portrait mode based on the screen rotation.

Step

5

6: Hide Navigation Bar in Fullscreen Mode / Enable screen pinning

Hide Navigation Bar in Full screen Mode

Once you’ve downloaded the Kiosk app, you can hide the navigation bar when using the Kiosk app in full screen mode.

Go back to the device to enable screen pinning:

  1. ‪Go to Settings > Player Settings > Screen > Fullscreen > turn on

image-20240126-140340.pngImage Added

(optional) Enable Screen Pinning

After enabling the “Hide Navigation Bar in Fullscreen Mode” setting, you should not be able to leave the app.

If you are still able to go out of the app, or fullscreen mode is not available on your device, you can enable Screen Pinning.

Info

The app will be pinned until the next reboot (after reboot: you’ll have to pin again), so only use this feature if there is no reboot scheduled

Go back to the device to enable screen pinning:

  1. ‪Go to Settings > Advanced Settings > Security > Screen pinning > turn on

  2. Open the Kiosk app > open recent apps (rectangle icon on 3-Button Navigation)> Click on the Kiosk app Icon > Select pin this app

IMG_8800.JPGImage Added
image-20240111-163814.pngImage Added
image-20240126-140340.pngImage Removed

(optional) Enable Screen Pinning

After enabling the “Hide Navigation Bar in Fullscreen Mode” setting, you should not be able to leave the app.

If you are still able to go out of the app, or fullscreen mode is not available on your device, you can enable Screen Pinning.

Info

The app will be pinned until the next reboot (after reboot: you’ll have to pin again), so only use this feature if there is no reboot scheduled

Go back to the device to enable screen pinning:

  • ‪Go to Settings > Advanced Settings > Security > Screen pinning > turn on

    • Open the Kiosk app > open recent apps (rectangle icon on 3-Button Navigation)> Click on the Kiosk app Icon > Select pin this app
    IMG_8800.JPGImage Removed
    image-20240111-163814.pngImage Removed

    Step 6: Install the app using Spacewell Device Control

    You have now successfully installed the Qbic Kiosk. 

    In order to further configure the device and install the Room Display app, follow the below instructions to Install the Kiosk app.

    Install the Kiosk app

    You’ll need a device account and an admin account in order to log in and install the Kiosk app.

    Keep your computer or tablet close, since you’ll need access to https://devicecontrol.cobundu.com/ to (remotely) configure the app settings.

    Prerequisites

    1. You’ll need both a Qbic device + a PC

    2. Both devices should be on the same network

    3. Create a device account (i.e. the device account that will be used to log into the Kiosk application) in Users & and Groups

    4. Ideally, you’ve already configured a Profile and a Theme, see Customizing the Room Display

    Step 1 - 3 - Install & Launch the app

    see Device Control for QBIC

    Info

    The Kiosk app will switch to the relevant Landscape or Portrait mode based on the screen rotation.

    Step 4 - Configure the app

    Expand
    titleOn the device, log in with the device account

    You will have to provide the device account that has been configured in Users & and Groups

    (warning) If your device account is already in use by another Kiosk app, you will receive an error message. You’ll have to go to https://devicecontrol.cobundu.com/ and unlink the account used by the other kiosk.

    Expand
    titleWait for the app to ask for a configuration

    If this is the first time you use the device account, the app will launch and give an error. Don’t panic, this is completely normal (wink) The app is asking which locations and profile to load.

    You’ll need your laptop for the next few steps.

    Expand
    titleOpen device control to set up the new app

    Go to https://devicecontrol.cobundu.com/ and log in with an admin account.

    You should see you new device in the list with a label “not configured” on the right.

    Expand
    titleSelect the device and press START CONFIGURATION

    When you select the device, a panel will appear from the bottom. Click on Start configuration.

    Expand
    titleSelect Floor Display

    Select FLOOR DISPLAY in the pop-up window that appears

    image-20240131-105443.png
    Expand
    titleSelect locations + a profile & theme to be applied

    Select one or more locations, a Profile and a Theme using the drop down menus.

    These settings will be pushed to the Kiosk app after you pressed SAVE.

    You can customize this later at any point.

    Expand
    titleYou might need to go back to the device and tap 'retry'

    Once you pressed RETRY the app will continue it’s configuration

    Expand
    titleCongratulations, you're ready

    Now you’re good to go

    Hide Navigation Bar in Fullscreen Mode

    Once you’ve downloaded the Kiosk app, you can hide the navigation bar when using the Kiosk app in fullscreen mode.

    Once the navi

    Go back to the device to enable screen pinning:

    1. ‪Go to Settings > Player Settings > Screen > Fullscreen > turn on

    Troubleshooting

    Expand
    titleIs it possible to turn Kiosk App 90° to see it in portrait/vertical mode?

    For Android, Kiosk App in kiosk mode is available in landscape and portrait mode. Change the system direction of your device as per the instructions in https://spacewell.atlassian.net/wiki/spaces/KB/pages/edit-v2/360022017#Step-4%3A-Define-Landscape-or-Portrait-mode

    For IOS and Windows, Kiosk App in kiosk mode is only available in landscape / horizontal mode.

    Expand
    titleIs it possible to break out of the Kiosk app?

    Only Administrators can break out of the Kiosk app. This Spacewell-Internal-Only page describes how to break out of the Kiosk app: /wiki/spaces/KB/pages/202014930

    Search

    Live Search