Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

Version 1 Next »

Difficulty: expert

Content

Learning Objectives

After reading this article, you’ll be able to:

  • Install the Outdoor Micro gateway

Best Practice: configure the device and check connection to Workplace Platform before installation, see Outdoor Micro Configuration

Installation

Device installation can be physically supported by either post mount or wall mount. Installation instructions are stated in the following sections and diagrams.

Post Mounting

Pre-installation preparations

Please make sure that all required tools and components are available prior to installation.

Tools: Allen wrenches (M5 and M8) or an adjustable wrench, Philips screwdriver

  • Mount the supplied antennas for LoRa and 4G/ LTE connectivity

  • Power up the Gateway by using Power-over-Ethernet (PoE) (ensure a power of 12V / 1,5 A)

  • xxx

  • xxx

  • xxx

Functional device

After configuration of Micro Outdoor, make sure to connect to power.

When using ethernet connection:

  • either connect PoE cable directly from the gateway to the network

  • or connect PoE cable from the gateway to the adapter (connection “data + power out”). Then plug in the adapter into a power socket and connect another PoE cable from the adapter to the network.

When using mobile connection: connect PoE cable from the gateway to the adapter (connection “data + power out”). Then plug in the adapter into a power socket.

Search

  • No labels