Difficulty: expert
Content
| Table of Contents | ||||
|---|---|---|---|---|
|
Learning Objectives
After reading this article, you’ll be able to:
Set up an excel that makes it’s really easy for the installer to provide location installation information
Use an excel sheet for batch upload of many sensors
Identify the different kinds of Tabs sensors
Perform a Battery Replacement on a Tabs sensor
Spacewell Hardware catalogue includes 3 kinds of tabs sensors:
Tabs Battery Replacement
When replacing a battery (or even placing the same battery again), wait for at least 3h 6h between removal and replacement of the battery to make sure that the capacitor will deplete (ie there is no left-over "power" inside the sensor).
Make sure that hubs are live gateways are confirmed connecting to the Workplace Platform when performing this action, so that the sensor (that has just found power again) can easily connect to the hub gateway without depletion of the battery.
Tabs sensors work on 1/2 AA 3.6V lithium batteriesCheck out this video:
| Widget Connector | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
Search
| Live Search |
|---|