Airthings
- Julie Isebaert
Difficulty: novice
Learning Objectives
After reading this article, you’ll be able to:
Identify the most ideal Airthings product for your needs
Airthings offers Indoor Air Quality sensors. These need a gateway/hub to communicate with the Workplace platform.
Space Pro
Space CO2
Space Plus
Space Hub
Affordable “OUT OF THE BOX” IOT solution
Very easy installation and setup
No cables- perfect for retrofit
No ethernet needed
Easy to scale
Long battery life, long range communication
Seven sensors – including Radon
Airthings sensors Air Quality Mini, Air Quality Plus and View Plus can integrate with Workplace.
no Workplace dashboard for Pressure available
no Workplace integration for Light data, only visible on the live floorplan > select location > view data
Track utilization based on comfort data
Based on the comfort data and some metadata (like m2 of the location), an underlying algorithm calculates utilization. It analyses the room over long periods of time to improve the virtual sensor’s performance. The algorithm also needs a minimum of 8 hours of data without gaps to show the virtual sensors.
Accuracy of the data depends on
Device placement
Room shape
Room size
Number of people in the room
Ventilation system & temperature gradients (mixing of air)
So far, the accuracy we tested was not satisfactory.
Unlike headcount sensors (with 90-95% accuracy), measuring utilization with Airthings is around 40-60% accurate*
For more information, see Utilization and Occupancy Matrix
*based on our findings so far, the accuracy could be better with further testing in optimal conditions
Regulatory information
The Airthings Hub is intended for indoor use only. Avoid direct exposure to sunlight for long periods.
Avoid exposure to direct heat sources. For correct usage, make sure the detector is operating in the specified temperature range (see technical specifications).
Exposure to high humidity might permanently alter the detector sensitivity or damage it.
Do NOT disassemble. If the Airthings Hub does not work as specified or if you are in doubt, contact your local dealer or visit us at Airthings | Smart indoor Radon & Air Quality Monitors.
Use a dry cloth to clean the detector.
Use only the adaptor supply shipped with the product.
Always snap the mounting bracket to the rear side to protect the product, even if the product is not permanently mounted.
Disposal: electronic equipment.
Search