Difficulty: expert

Installation is done by Zens.

Prerequisites

• For the Smart PuK Visual / wireless charger:

  • A hole with a diameter of 81 mm needs to be drilled in the table at the position where the Smart PuK Visual should be placed.

  • 230V power plug

• The motion sensor needs to be installed in the center at the bottom of the desk.

  • The ideal distance from the front of the desk to the front of the sensor is 300 to 350 mm

  • Provide an unobstructed view of the sensor for an optimal detection area

  • The motion sensor will be screwed with two screws on the underside of the desk

Open

Search