Difficulty: starter

What is Xovis?

The XOVIS sensors detect people flow across a(n imaginary) traffic line, and send analytics data over a secure, encrypted network connection.

Traffic Line areas are intended to track traffic going in and coming out of a specific location. They produce information such as “In the last update period, 5 people crossed the Traffic Line going IN to the area, 3 people crossed the line going OUT”. The delta, or difference, between these two values provides us with the information on how many people are still in the tracked area (utilization).

How does it work?

Non-intrusive solution

The functionality of Xovis 3D stereo vision sensors is based on two optical CMOS image sensors arranged at a certain distance to each other. The images are compiled to a stereo image in real time on the device. The processed images are not stored.

Pixel lock

All Spacewell Xovis devices come with Pixel Lock: an irreversible function that applies a filter to all scene images right after the embedded processing.

 

• People can be clearly seen, but not recognized.

• Documents or screens are impossible to read.

• Edges are kept sharp, to allow accurate placement of geometries or stitch sensors for wide entrances.

• It is not possible to reproduce a sharp image anymore based on the Pixel Lock image.

Open

How often is data captured?

Technically, the sensor is always on and could update the Workplace platform as soon as a detection has occurred.

As a default, the data is uploaded into the Workplace Cloud every 1 min: this interval is low enough, that a person will be captured, yet it also reduces false detection issues.

Decay Configuration options

Perhaps you would want to indicate in Workplace Live Occupancy View that if a Desk sensor has been triggered, the location is occupied for at least 2 more hours, so that colleagues and guests can go to lunch or drop by a meeting without having to fear that someone is clearing out their workplace? But at the same time you want to indicate that a meeting room has freed up as quickly as possible, so that it turns green (“available”/”not occupied”) and people can recognize this at a glance?

The Workplace back-end Studio configuration options have you covered: per room category, both the icon and the decay timer can be modified.

Open

How is data treated?

When a XOVIS device is configured using Footfall, the footfall data will be visualized on ​Live Data floorplan | View by Footfall IN/ Footfall OUT + Footfall TOTAL.

The difference between Traffic IN and Traffic OUT indicates how many people are still inside the location. This value is calculated and is used as (indirect) Utilization value. (see ​Utilization and Occupancy Matrix | Indirect Utilization & Occupancy)

The calculated/ indirect Utilization value

• real time data can be visualized in the Live Floorplan ​View By Space Utilization.

• historical data can be visualized in the Replay - Timelapse​ and in the Space monitor​ dashboard.

In theory, the traffic line counter just continues counting. Because of the use cases within the Workplace platform (know daily flux of people coming in and going out; and indirect utilization), counters are reset at midnight.

XOVIS Accuracy

XOVIS provides highly accurate data on Traffic Line detection, yet some factors might impact people detection:

• Make sure lights are turned on/there is enough daylight. It should not be too dark in the room

• Nothing should be blocking the sensor detection area

  • items might be suspended from the ceiling (eg HVAC or light fixtures)

  • items might be too high and block visibility (eg high back chairs or office screens)

• Reflections in windows (might be avoided by restricting count area in the configuration)

• Installation needs to be level (not tilted)

• Installation location: make sure to verify measurements (height + length/width) in the config platform

Find more information on

https://www.xovis.com/

Search