/
Xovis project

Xovis project

Difficulty: expert

Learning Objectives

After reading this article, you’ll be able to:

  • Understand better the steps in the Xovis process

  • Communicate the Xovis project steps to all stakeholders


Step 1. Prepare your project

  1. For a Spacewell consultant to get access to the Xovis hub, reach out to the Hardware team

  2. As in every project, check the Sensor plan with the (in this case Xovis) Xovis installation location instructions

  3. Make sure on-site situation fits the Xovis hardware and network requirements

XOVIS WiFi devices' initial configuration (of the WiFi credentials) needs to happen while running a LAN/ethernet connection, and while being able to connect to the target WiFi network.

This means that, for the time required for the configuration, the customer needs to make a LAN network available, in a location where the target WiFi network is also reachable.

Step 2. Xovis Installation

Follow steps on Xovis installation

As soon as the devices are powered up for the first time: based on the hardware shipment list (see https://spacewell.atlassian.net/wiki/spaces/WM/pages/229015617/Hardware+Logistics#Overview-of-hardware-orders for the latest relevant link), the Spacewell consultant should verify the Xovis' devices MAC addresses are listed in the Xovis hub under “Unmanaged Devices”.

If you don’t see your devices listed under Unmanaged Devices, reach out to the Hardware team (create ticket “Check on TTN”)

Step 3. Xovis Configuration

Follow steps on Xovis configuration:

  • Configuration steps 1+2 (General Settings) need to be done while connected to the same network as the device

  • Configuration steps 3 (Singlesensor Settings etc) and further:

    • if devices are not available on Xovis hub (as checked in step 1” Prepare your project”): you’ll have to do this configuration step on site

    • if devices are available on Xovis hub, then you can do the configuration remotely

 

Step 4. Xovis Deployment in Workplace

Follow steps on Xovis deployment

Step 5. Xovis Quality Assurance

see Xovis configuration | Step 5. Quality Assurance

 


 

Search

Search