/
Mini Display Hardware installation (Qbic)

Mini Display Hardware installation (Qbic)

Owned by Julie Isebaert
Mar 04, 2025
2 min read

Difficulty: expert

Learning Objectives

After reading this article, you’ll be able to:

  • Install Qbic Mini Display devices

  • Perform initial configurations on Qbic Mini Display

Prerequisites

The Mini Display is powered through a USB-C power adapter.

The Mini Display communicates through WiFi (802.11 a/b/g/n/ac)

On the network, the devices must have HTTP & HTTPS access via port 80 & 443.
A Static IP is not required

All devices can be mounted either using a TAPE or with SCREWS - both included in the box

Untitled-20250304-175706.jpg
Untitled-20250304-175730.png

The box will also include additional rubbers, that need to be attached to the bracket, so the device does not wobble too much while typing

Untitled-20250304-175801.png

Quick start guide

Untitled-20250304-180128.png
image-20250304-180417.png

Preparing the device to install the app

Step 1: Power the device

The device will launch automatically after connecting it to a power supply.

The device does not have a fixed battery; therefore, it is important to maintain a stable power supply.

Step 2: Connect to the network

  • The wireless network can be configured via the app's home screen:

In case your device seems to be stuck in the booting process, you will need to reset the device: there is a hole labelled "reset" at the back. Power on the device and push a paperclip for 10 seconds in the reset hole (you should feel a click when pushing the reset button).

Step 3: Install the app using Spacewell Device Control

You have now successfully installed the Qbic Mini Display. 

In order to further configure the device and install the Mini Display app, follow the instructions for  Installing the Mini Display app

 

 

Search

Search

Related content