/
Installing the Mini Display app

Installing the Mini Display app

Owned by Julie Isebaert
Mar 04, 2025
2 min read

Difficulty: expert

Learning Objectives

After reading this article, you’ll be able to:

  • Configure the Mini Display App through Device Control to run on a Qbic Mini Display

This manual is applicable for the Mini Display

image-20250304-173442.png
image-20250304-173446.png
image-20250304-173450.png

Prerequisites

  1. You’ll need both a Qbic TD-0360 device + a PC

  2. Both devices should be on the same network

  3. Create a device account (i.e. the device account that will be used to log into the Kiosk application) in Users and Groups

Step 1 - 3 - Install & Launch the app

see Device Control for QBIC

Step 4 - Configure the app

You will have to provide the device account that has been configured in Users and Groups

If your device account is already in use by another Mini Kiosk app, you will receive an error message. You’ll have to go to https://devicecontrol.cobundu.com/ and unlink the account used by the other kiosk.

If this is the first time you use the device account, the app will launch and give an error. Don’t panic, this is completely normal The app is asking which location to load.

You’ll need your laptop for the next few steps.

Go to https://devicecontrol.cobundu.com/ and log in with an admin account.

You should see you new device in the list with a label “not configured” on the right.

image-20240131-111139.png

 

When you select the device, a panel will appear from the bottom. Click on Start configuration.

image-20240131-111259.png

 

Select ROOM DISPLAY in the pop-up window that appears

image-20240131-105443.png

Select the Room you want to see values for.

You don’t have to select any Profile or Theme.

Once you pressed RETRY the app will continue it’s configuration

Now you’re good to go!

 

 

Search

Search

Related content